Please let us know in the comments section below.
It’s essential that the filters are both completely dry before you place them back into the filter frame.You don’t want to risk water being sucked into the motor, as this can cause permanent damage.. Filters typically take around 24 hours to dry after being washed.
They may take longer in humid or cold environments though, so double-check that the filter is completely dry before moving to the next step..In the CH950UKT manual, Shark specifically mentions that you shouldn’t use a hair dryer (or any other drying tool) to speed up the process.The filters should only be air-dried..
Step 5: Re-Assemble The CH950UKT.Once the filters are dry, you can put them back into the filter frame.
The foam filter should go first, followed by the thinner felt filter..
Finally, reinstall the filter frame into the dust cup, and reattach the canister section to the vacuum body.In particular, the XL Plus copes well with both the dust and larger debris you get from DIY and home renovations.
It’s both powerful enough and durable enough to tackle tasks that wouldn’t be suitable for a regular cylinder vacuum cleaner.. Carpets.The Henry XL Plus’ cleaning performance on carpets and rugs is good enough for a basic vacuum, but it’s far from the best we’ve reviewed.
It’ll pick up most debris with relative ease, but you may find you need to do a few extra sweeps for finer dust.. Our main problem with the Henry XL Plus for carpet cleaning is the combi floorhead seems to have a mind of its own.It’s tricky to manoeuvre and can skip across the surface, particularly on plush pile carpets.